• Home
  • Contacts
  • Add News
  • Donate Donation

» Articles for 08.07.2015

Mentor Graphics Xpedition Enterprise VX.1.1 English 32-64 bit

Mentor Graphics Xpedition Enterprise VX.1.1 English 32-64 bit
Win | 8.16 GB



Xpedition Enterprise from Mentor Graphics is the industry’s most innovative PCB design flow, providing integration from system design definition to manufacturing execution. Its unique, patented technologies can reduce design cycles by 50 percent or more while significantly improving overall quality and resource efficiency.

Mentor Graphics Questa Sim SE 10.2c English 32-64 bit

Mentor Graphics Questa Sim SE 10.2c English 32-64 bit
Win | 1.29 GB



The Questa Advanced Simulator combines high performance and capacity simulation with unified advanced debug capabilities for the most complete native support of Verilog, SystemVerilog, VHDL, SystemC, PSL and UPF. The Questa Advanced Simulator is the core simulation and debug engine of the Questa Verification Platform; the comprehensive advanced verification platform capable of reducing the risk of validating complex FPGA and SoC designs.

Mentor Graphics PADS 9.5 + Update 2 English 32-64 bit

Mentor Graphics PADS 9.5 + Update 2 English 32-64 bit
Win | 1.74 GB



PADS enables engineers and design teams to develop PCBs within a highly productive and easy-to-use environment. PADS is ideal for schematic entry, analog design, signal and power integrity, thermal analysis, and PCB layout-to-manufacturing preparation.

Mentor Graphics HyperLynx 9.0.1 English 32-64 bit

Mentor Graphics HyperLynx 9.0.1 English 32-64 bit
Win | 1.55 GB



HyperLynx offers a complete suite of analysis and verification software that meets the needs of PCB engineers at any point in the board design flow. Easy to use and integrate into your flow, HyperLynx equips PCB engineers to efficiently analyze, solve and verify critical requirements to avoid costly re-spins. Achieve greater innovation, faster time-to-market and decreased costs with HyperLynx.

Mentor Graphics FloVIZ 10.1 English 32-64 bit

Mentor Graphics FloVIZ 10.1 English 32-64 bit
Win | 94 MB



Mentor Graphics Corporation, a world leader in electronic hardware and software design solutions, providing products and consulting services, has released FloVIZ 10.1, the allows anyone to freely open, interact with and animate the analysis results generated by FloTHERM, FloTHERM PCB and FloVENT.

Users of Mentor Graphics thermal simulation tools have an extensive array of results visualization capabilities at their disposal. Thermal design is a collaborative effort. To ensure that design engineers can communicate design intent with customers and suppliers effectively and without requiring additional outlay of cash, the Mechanical Analysis Division offers its customers FloVIZ, FloTHERM's postprocessing module. As a result, any team member can explore the 3D temperature and flow fields, Description surface temperatures, identify hot spots and regions of poor air flow, etc. In addition, FloTHERM.PCB provides a highly automated PCB-level thermal simulation with automated Descriptions giving immediate identification of thermally critical components to facilitate communication with PCB designers.

Mentor Graphics FloTHERM XT v2.0 English 64 bit

Mentor Graphics FloTHERM XT v2.0 English 64 bit
Win | 3.07 GB



FloTHERM XT - program for the simulation of aero-hydrodynamics and heat transfer problems for the internal and external flow of liquids and gases with the combined effects of heat conduction, convection and radiation.

Mentor Graphics FloTHERM 10.1 English 32-64 bit

Mentor Graphics FloTHERM 10.1 English 32-64 bit
Win | 512 MB



CAD\CAM Mentor Graphics Corp., announced its next-generation FloTHERM product featuring a new native Windows graphical user interface (GUI) to handle pre-processing and large models with ease, targeting today’s most advanced electronic designs. The latest release continues the product line’s 25 year history of technical product innovation and was developed based on extensive user feedback.

The new FloTHERM product was developed from user feedback via the company’s IDEAS website, soliciting requests on software enhancements and features that Mentor customers recommended and voted on as the most popular. Over 40 IDEAS requests were fulfilled, resulting in the new Windows-compliant GUI, parallel CFD solver and efficient handling of massive models for pre-processing, solving and post-processing.

New FloTHERM product capabilities include:

- The new Windows-compliant user interface can handle models with thousands of objects. A query-based search function, together with data columns integrated with the model node tree, provides critical model checking capabilities to define data, identify errors and to further enhance the FloTHERM user experience.
- A new parallel solver provides scalability and fast performance for multi-processors. This capability was the #1 requested functionality from the Mentor customer-feedback portal, and makes this FloTHERM release on average two to three times, and up to 14 times, faster than previous versions.
- The addition of new modeling objects to represent racks of equipment and data center cooling devices enables users to simulate and optimize everything from a chip to an entire room.
- The transient thermostatic control modeling functionality allows model inputs to be varied in time and as a function of the temperature during a transient simulation. A key benefit from this feature is the ability to reduce component power dissipation, either the component’s own temperature, or those from external stimuli. Customers involved with thermostatic control systems, such as consumer electronics, computing and hand-held telephony and tablets find this new functionality helpful.
- The FloTHERM product now also supports fluid-structure interaction through a mesh-based parallel code coupling interface (MpCCI) bridge developed at the Fraunhofer Institute SCAI. Now engineers can export CFD analysis data for finite element analysis (FEA) with a wide range of popular structural simulation programs thereby enabling users to conduct multi-disciplinary analyses.

Mentor Graphics FloMCAD Bridge CATIAV5 support for FloTHERM 10.1

Mentor Graphics FloMCAD Bridge CATIAV5 support for FloTHERM 10.1
Win | 208 MB



Mentor Graphics Corporation, a world leader in electronic hardware and software design solutions, providing products and consulting services, has released FloMCAD Bridge CATIAV5 support for FloTHERM 10.1, is a enables parts and assemblies to be transferred easily and rapidly to FloTHERM for thermal analysis from mechanical computer-aided design (MCAD) software.

FloMCAD Bridge intelligently filters the geometrical data for a particular part or assembly and creates a simplified "thermal equivalent" for analysis purposes.

This is critical because production-quality MCAD solid models contain a vast amount of thermally insignificant geometric detail such as fillets, small holes, chamfers and screw treads. These details provide no accuracy benefit if included but can drastically slow down the solution process.

The ability to defeature a part to match its thermal importance prior to translation offers a massive improvement in the efficiency of the model creation workflow process.

Mentor Graphics FloEFD v13.2 Multilingual 64 bit

Mentor Graphics FloEFD v13.2 Multilingual 64 bit
Win | 1.05 GB



Mentor Graphics Corporation, a world leader in electronic hardware and software design solutions, providing products and consulting services, has released FloEFD 13.2, is a full-featured 3D computational fluid dynamics analysis solution built into major MCAD systems.
FloEFD is a full-featured 3D fluid flow, heat transfer analysis package that is both fast to learn and fast to use because it doesn't come with the numerical complexity and meshing overheads of traditional high-end CFD.

Easy-to-use CAD embedded Concurrent CFD - For analysis to become an integral part of the design process, it must be easy to use and able to adapt readily to your design process. Developed for engineers, FloEFD turns CFD analysis into a plug-in for CAD. Because of its intuitive interface, FloEFD is extremely easy to use - in fact, most design engineers report that they can use FloEFD with less than 8 hours of training.
Better Products, Faster - Award winning FloEFD is 'Concurrent CFD', fully embedded CFD analysis software that enables Design Engineers to better products, faster.

Mentor Graphics Capital 2014.1 English 64 bit

Mentor Graphics Capital 2014.1 English 64 bit
Win | 1.14 GB



Capital is an advanced software suite for the electrical system and wire harness domain. Used by leading automotive, aerospace and harness makers, Capital is built to support the complex demands of integrated processes from initial vehicle definition through design, manufacture and service.
1 2 3
Previous     Next

Create an account

Calendar

«    July 2015    »
MonTueWedThuFriSatSun
 12345
6789101112
13141516171819
20212223242526
2728293031 

Who's Online?

Module online =)

Advertising

Tag Cloud

Poll

Which search engine visit in regular basis?

www.google.com
www.baidu.com
www.yahoo.com
www.bing.com
www.ask.com
www.wiki.com
www.wolframalpha.com
None of above

Popular

    Advertising

    Post Statistics

    • meter module materials and of comments on the site =)

    Friends Sites